ProWarm™ Solid floor panels (1200mm x 1200mm x 25mm) are ideal for installations where a water underfloor heating system is required with a tiled finish floor covering.

Our 25mm Solid floor system is suitable for domestic as well as commercial applications. These Super insulated Extruded polystyrene panels are ideal for using directly under tiled floor coverings
 

Panels must be installed onto existing suitable subfloors ie: solid concrete/screeded floors or suitable 18mm structually sound wooden subfloors such 18mm exterior plywood (please see TTA guidlines for suitable subfloors).

These panels must be installed in accordance with our strict installation instructions.

Please see installation tab, fitting packs for wooden floors include screws and washers.

ProWarm™ extruded polystyrene panels are pre-routed in different patterns making pipe installation easy.

ProWarm™ 16mm European Standard Pex-Al-HDPE pipe sits flush inside the ProWarm insulation panels ready to receive a layer of Ultra 2 part levelling compound.

Tiling must be carried out in accordance with manufacturers guidelines.

If you are in any doubt about any part of the installation process then please call our technical advice line on 01268 567019.

PLEASE NOTE: Boards will be cut in half due to courier restrictions if less than 14 boards are ordered.